| Allegheny Wood Products |
| 577 Clover Dew Dairy Road |
| Princeton, WV 24740 |
| |
| |
| |
| AWP Mill Office- BLDG NO:0601 |
| Occupancy: Office |
| Constructed: 1995 |
| Construction: Wood Frame, Shingle Roof, Western Cedar Siding |
| Square Footage: 2,773 |
| Stories: 2 |
| Life Expectancy: 25 Years |
| Building |
| Equipment to include but not limited to Office Furniture, Computers, Printers, |
| Electronic Data Processing (EDP) Equipment |
| Telephone System |
| |
| |
| |
| |
| AWP Log Yard Scaler Shed- BLDG NO: 0635 |
| Occupancy: Office |
| Constructed: 1995 |
| Construction: Frame Construction, Shingle Roof, Man Door |
| Square Footage: 144 |
| Stories: 1 |
| Life Expectancy: 5 Years |
| |
| |
| |
| |
| AWP Log Yard Storage Building- BLDG NO: 0603 |
| Occupancy: Storage |
| Constructed: 1995 |
| Construction: Frame Construction, Man Door |
| Square Footage: 160 |
| Stories: 1 |
| Life Expectancy: 2 Years |
| |
| |
| |
| |
| AWP Sawmill- BLDG No: 0618, 0619, 0607 &0631 |
| Occupancy: Debarker, Sawmill, Green Chain, Chip System, Loading |
| Constructed: 1995 |
| Construction: Metal Frame with Metal Roof, Mostly 4 Metal Sides with Openings for Log and Lumber |
| Square Footage: 69,082 |
| Stories: 2 |
| Life Expectancy: 25 Years |
| |
| |
| |
| Debarker System |
| Fulghum Rosserhead Debarker, 4x6' Climate Controlled Operators Cab; Hydraulic Power Pack |
| Rens Model 345 Pass through Log Metal Detection Belt Conveyor 20'x30"; Gear Motor Drive |
| 25' Endwise Log Trough; Gear Motor Drive, (infeed to Metal Detector) |
| 60' Endwise Log Trough; (2) 3 Arm Kicker Units, Kicking in Either Direction; Gear Motor Drive |
| |
| |
| |
| |
| Head Rig |
| Bar Type Log Turner |
| Salem 4 Head Block Lineal Position Carriage, USNR 3-D Scanner & Setworks; AC/DC Carriage Drive; Falk Gear Box |
| ASM Chipping Slabber: 300 HP motor |
| Salem Band Head Rig (McDonough Hood), 7' (no plate) |
| 175' Main Rollcase from Head Rig through Mill |
| 30"x6" Live Rolls, Air Stops and Kickers; (3) Gear Reduction Drive |
| |
| |
| |
| |
| Line Bar Resaw System |
| Salem 25' 4 Strand Lumber Transfer Deck, Air Stops, "S" Drive Constructions; Gear Reduction Drive |
| Infeed Positioning Table (6) 10x48" Rolls; Cant Turner; Cant Positioner |
| Salem 6' Line Bar Resaw, (sn: L1711351.95) Left Hand; Climate Control Operator Cab; Setworks |
| 20' Outfeed roll Case, 54" Rolls |
| 4 Arm Chain Pop Up to Take Cants to Run Around |
| 10' 4 Strand Transfer Deck; 4 Air Stops; Gear Reductions Drive |
| 180 Degree Radius Turn Around Deck |
| 20' 4 Strand Transfer Deck; (3) Air Stops, coming back to Infeed of Resaw |
| 4 Strand 40' Transfer Deck |
| |
| |
| |
| |
| Gang System |
| 20' Rollcase, 54" Rolls; (2) 5' 4 Arm Pop Up Transfers, Air Operated; Gear Motor Drive |
| 25' 4 Strand Transfer, "S" Drive Construction; Gear Reduction Drive |
| 20' 4 Strand Transfer, Air Stop; Gear Reductions Drive |
| 20' Self Positioning Infeed Rollcase to Gang; Cant Turners |
| Salem Top Arbor, 10' Thin Kerf Gang; 350 HP Motor; 6x10' Climate Control Operator's Cab; Controls in Cab |
| 40' Outfeed Rollcase, 32x8" Live Rolls; Gear Reduction Drive |
| 55' Rollcase, 30x6" Rolls; Gear Reduction Drive |
| 30'x24" Blet conveyor; Gear Reduction Drive & Motor |
| |
| |
| |
| |
| Edger System |
| 35' 5 Stand Lumber Deck; Gear Motor Drive |
| 5' 6 strand Singulator Unscrambler to Edger Infeed |
| McDonough 26x8" Rollcase, Even Ender; Control Panel Push Button to the Edger includes 16' 6 Strand Transfer Deck, Even Ender Rolls; (5) Sets of Air Stops to Edger Infeed |
| Newnes Lumber Scanning System |
| McDonough 18' High Speed Feed Table to Edger |
| McDonough 3 Saw High Speed Edger; 150 HP Motor |
| 19' McDonough Tailing Device; Hydraulic Supply |
| 70'x24" Belt Conveyor, Return to Trimmer |
| 7' 4 Strand Landing Deck |
| 90' 5 Strand Lumber Deck; Gear Reduction Drive; Motor |
| 40' Live Rollcase, 30x6" Rolls; Gear Reduction Drive; Motor |
| |
| |
| |
| |
| Trimmer Line |
| 100' 5 Strand Lumber Accumulation and Transfer Deck; Gear Motor Drive |
| 4' 6 Strand Unscrambler |
| Salem 16' Drop Saw Trimmer, 0-16' Capacity includes 35' Pass Through Deck, Even Ender Rolls, Lineal Set Gates; Control Panel |
| 30' 5 Strand Haul Down Lug Chain Lumber Transfer Deck |
| 100' x24" Belt Conveyor for Waste |
| 40' 5 Strand Green Chain Grader Deck |
| 250' 4 Strand Green Chain Lumber Deck (2) 10 HP Motors |
| |
| |
| |
| |
| File Room |
| Armstrong Right Hand #4, (sn: 13249); Clamps; Stands; Dust System; Air Swage |
| Armstrong #4 Right Hand Band Saw Sharpener, (sn: 11835); Clamps; Stand; Dust System; Air Swage |
| Armstrong Leveler, (sn: 20503) |
| Armstrong Bandsaw Hammer Stand; Armstrong #5 Stretcher Rolls, (sn: 17513); Hammer; Anvil; Hanchett Welder |
| Miller Welder |
| Salem Guide Grinder |
| Salem Guide Press Mold |
| Salem Band Saw Guide Grinder |
| Jacobson Manufacturing Company, Model JM100 Circle Saw Grinder |
| Jacobson JM300 Circle Saw Tipper |
| Acme Circle Saw Sharpener |
| Hanchett #12 Circle Saw Stretcher Roll |
| Circle Saw Hammering/Welding Station |
| Palmgren Steel Products 17" Drill Press |
| Miller Welder in Cage |
| |
| |
| |
| |
| Waste System Under the Mill |
| Progress 80' Vibrating Conveyor, 24" Bottom; 20 HP Motor; Under Gang |
| 55' Progress Vibrating Conveyor, 17" Bottom; 10 HP Motor; Under Line Bar Resaw |
| 60' Progress Vibrating Conveyor, 24" Bottom; 20 HP Motor; Under Line Bar Resaw |
| 30' Concave Belt Conveyor, 20" Bottom; Gear Motor Drive, Under Line Bar Resaw |
| 50' Progress Vibrating Conveyor, 24" Bottom; Gear Motor Drive, Under Line Bar Resaw |
| 60' Progress Vibrating Conveyor, 24" Bottom; 10 HP Motor; Under Line Bar Resaw, Under Line Bar Resaw |
| 120' Progress Vibrating Conveyor; 24" Bottom; 20 HP Motor; Under Line Bar Resaw with 5' Fiberglass Sections, MDI Metal Detector, Under Line Bar Resaw |
| 80' Progress Vibrating Conveyor; 17" Bottom; 20 HP Motor to the Chipper |
| 65' Progress Vibrating Conveyor, 12" Bottom with Drive to the Chipper |
| 60' Progress Vibrating Conveyor, 17" Bottom; 10 HP Motor to the Chipper |
| 50' Progress Vibrating Conveyor, 17" Bottom; 10 HP Motor to the Chipper |
| 25' x12" Belt Conveyor |
| |
| |
| |
| Electrical Upstairs |
| Industrial Electric Service; AC/DC Drive |
| Benshaw Soft Start Starter for Head Rig |
| Benshaw Soft Start Starter for Slabber |
| 800 Amp Cutler Hammer MCC Panel |
| Cutler Hammer MCC Panel |
| 350 Amp Breaker for Gang |
| |
| |
| |
| |
| Electric Under the Mill |
| Cutler Hammer MCC Panel, 800 Amp |
| 300 Amp for Chipper |
| Cutler Hammer 800 Amp MCC Panel |
| Eaton 4000 Amp Main |
| Cutler Hammer 4,000 amp Breaker Box |
| Industrial Electric Resaw Soft Start (250 HP) |
| Chipper Breaker (300 hp motor on Chipper) |
| |
| |
| |
| Air Compressors |
| Gardner Denver 50 HP Screw Type Air Compress with Reserve Tank |
| Gardner Denver Air Compress- Out of Service |
| Gardner Denver Screw Type Air Compressor (downstairs) 23,700 Hours; 150 HP Motor |
| J & L Supply Company Air Dryer (downstairs) |
| Grecon Water Pump |
| All Air Lines & Regulators Through Out the Sawmill |
| |
| |
| |
| |
| AWP Chip Loading- BLDG NO: 0606 |
| Occupancy: Storage |
| Constructed: 1995 |
| Construction: Steel Frame with Metal Roof, 2 Sides Metal |
| Square Footage:1,716 |
| Stories: 1 |
| |
| |
| |
| |
| Chipper System |
| Progress Chipper Modal -70, (sn: 001218); 8 Knife, Horizontal Feed, Bottom Discharge; 300 HP Motor |
| Progress 60' Chain Type Chip Removal Conveyor, 10" Ladder Back Chain |
| Progress 10x10' Shaker Screen, (sn: 011187) |
| 90'x20" Concave Belt Conveyor to Chip Load Out system |
| 40' Dual Auger Chip Load Out System |
| Newman G280 Knife Grinder; Chipper Knife Mold; Smelting Pot |
| |
| |
| |
| |
| AWP Sawdust and Bark Loading -BLDG NO: 0604 |
| Occupancy: Loading |
| Contracted: 1996 |
| Construction: Steel Frame with Metal Room, Non Combustible, No Sides |
| Square Footage: 3,116 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| |
| Waste System |
| 125' Bark Waste Conveyor; 10" Ladder Back Chain |
| 80' Bark Conveyor to the Hog; 10" Ladder Back Chain |
| Progress Model 27 (sn: 960026); Bark Grinder 125 HP Motor |
| 60' Haul Out Conveyor; 10" Ladder Back Chain |
| 72" Blower; 150 HP Motor to the 10' Cyclone & Due Pipe through out the mill |
| 150' Saw Dust Conveyor; 10" Drag Chain |
| 40' 4 Station Auger Type Material Load Out System |
| AFS Air Lock System |
| |
| |
| |
| |
| AWP Dip Tank- BLDG NO: 0608 |
| Occupancy: Dip Tank |
| Constructed: 1995 |
| Construction: Metal Frame with Metal Roof, 3 Metal Sides |
| Square Footage: 2,592 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| Dip Tank |
| 8x20' Dip Tank; Hydraulic Hoist |
| |
| |
| |
| |
| AWP Planer Building-BLDG NO. 0713 |
| Occupancy: Planer |
| Constructed: 1995-2006 |
| Construction: Metal Frame with Metal Roof |
| Square Footage: 25,080 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| Reman Line/Planer |
| 8' 3 Arm Titling Break Down Hoist |
| 15' 3 Strand Package Deck |
| 12" Stick Removal Belt |
| Hydraulic Pack |
| 30' 3 Strand Stick Removal Deck, Lug Chain; Gear Motor Drive |
| 15' 7 Strand Lumber Transfer Deck; Gear Motor Drive |
| 55'x 24" Belt Conveyor; Gear Reduction Drive |
| 15' 7 Strand Transfer Deck; Gear Motor Drive |
| 30'x24" Belt Conveyor, Hydraulic Drive |
| Yates American Planer, Double Surfacer, 75HP on top, 40 HP on Bottom, Helical Heads, 24" wide, Hydraulic |
| 12'x24" Belt Conveyor, Outfeed, Hydraulic Drive |
| 60' 5 Strand Grading Deck; Gear Reduction Drive |
| Newmes 16' Trimmer, Shaft Driven, Push Button Controls; Infeed Deck with Even ender Rolls |
| 100' 5 Stand Green Chain Pull Deck; Gear Motor Drive |
| (21) 4x8' Lumber Carts |
| 20' Vecoplan Vibrating Conveyor with Drive (Under Trimmer) |
| Vecoplan Slow Grinder with 60 HP Electric Motor; 10x17" Vibrating Conveyor; Motor and Controls |
| Dust System |
| 72" Blower with 125 HP motor |
| Blow Pipe in Building |
| Blow Pipe into Bag House |
| 10" Diameter Dust Back House With Air Lock System |
| 10' Cyclone |
| Rip Saw |
| 18'x24" Belt Conveyor; Gear Motor Drive |
| Mattison 202 Straight-line Rip Saw |
| 9' 6 Strand Lumber Transfer Deck; Motor and Drive |
| 12'x20" Gravity Roll Case |
| 10'x24" Belt Conveyor; Gear Reduction Drive |
| Mattison 404 Rip Saw; Uninstalled |
| |
| |
| |
| |
| |
| AWP Yard Break Room-BLDG NO. 0716 |
| Occupancy: Breakroom |
| Constructed: 2006 |
| Construction: Joisted Masonry |
| Square Footage: 920 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| |
| AWP Waste Wood Boiler- BLDG NO. 0710 |
| Occupancy: Boiler |
| Constructed: 2006 |
| Construction: Metal Frame with Metal Room, 4 Metal Sides |
| Square Footage: 1,700 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| AWP Waste Wood Silo- BLDG NO. 0711 |
| Occupancy: Silo |
| Constructed: 2006 |
| Construction: 20 Ft Diameter x 88 Ft, Reinforced Concrete |
| Includes Flying Dutchman System |
| |
| |
| |
| |
| AWP Boiler Room- BLDG NO. 0701 |
| Occupancy: Boiler |
| Constructed: 1995 |
| Construction: Metal Frame with 4 Insulated Sides, Roll Out Door, and Man Door |
| Square Footage: 2,310 |
| Stories: 1 |
| Life Expectancy: 25 years |
| |
| |
| |
| |
| Boiler |
| AFS Wood Fired Boiler |
| 600 BHP, 150 PSI Stream Boiler with Fuel Metering Equipment |
| Dual Multi-Cyclone Fly Ash Collectors, Stack and Fuel Transfer Equipment |
| Installed 2007 |
| |
| |
| |
| |
| Dry Kiln |
| (6) SII Dry Kilns each with SII Control System |
| (3) Irvington Dry Kilns |
| |
| 660,000 Board Feet Capacity |
| |
| |
| |
| |
| AWP Electric Building-BLDG No. 0712 |
| Occupancy: Electric Controls |
| Constructed: 2006 |
| Construction: Concrete Block, Man Door |
| Square Footage: 234 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| Pre Dryer |
| Pre Dryer Building- Pre-Fab Construction, Aluminum, 4 Sided |
| Lignomat Kiln Control System: 900,000 Board Feet Capacity, Three Zones at 300,000 Board Feet Per Zone |
| Installed 2013- |
| Square Footage: 20,000 |
| |
| |
| |
| |
| AWP Stacker Shed- BLDG No. 0714 |
| Occupancy: Stacker |
| Constructed: 1995 |
| Construction: Metal Frame, Metal Roof, 3 Sides |
| Square Footage: 3,003 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| Complete Stacking System |
| 25' 4 Strand Package Deck |
| Waterfall Unscrambler, Even ender Rolls |
| 8' Stick Stacker |
| Outfeed Roll case |
| |
| |
| |
| |
| AWP Grade/Pack/Paint- BLDG NO. 0702 |
| Occupancy: Grading/Pack/Paint |
| Constructed: 1995 |
| Construction: Metal Frame, Metal Roof, 3 Metal Sides |
| Square Footage: 14,578 |
| Stories: 1 |
| Life Expectancy: 25 years |
| |
| |
| Grading System |
| Complete Stacking System to include Morris Industry Control (MIC) 8' Lumber Breakdown System, 5 Arm; 45' 5 Strand Package Deck, "S" Drive Construction; Gear Reduction Drive; Breakdown is Hydraulic |
| Stick Removal 12" Belt Conveyor, (no belt) |
| MIC 50' 7 Strand Grading Deck ?? |
| 35' 5 Strand Grading Deck |
| 30'x24' Belt Conveyor; Gear Reduction Drive |
| 35' 5 Strand Plated Lumber Transfer Deck; Gear Motor Drive |
| (4) 36x8" Gravity Roll Rollcase |
| Porter Radial Arm Chip Saw; Gravity Rollcase |
| Mattison 404 Straight Line Rip Saw |
| MIC 35'x14" Belt Conveyor |
| MIC 50'x24" Waste Belt Conveyor |
| MIC 60' 4 Strand Green Chain; Pull Chain |
| MIC 15' 6 Strand Belted Haul Up Conveyor, 4" Belt |
| MIC 4' to 8' Sticking Stacker, All Hydraulic, Hydraulic Down Hoist |
| MIC 40'x8' Outfeed Package Rollcase |
| MIC 30' 2 Strand Deck for Stacking Sticks |
| (9) 4x10' Lumber Carts |
| 25 HP Tank Mount Air Compressor, Horizontal Tank |
| Comp Air Aire Dryer |
| |
| |
| |
| |
| Tally System |
| 35' 4 Strand Package Deck to Tally System |
| 55' 4 Strand Package Deck |
| 10' Heavy Duty 4 Strand Skate Rolls |
| Vision Tally System |
| Scales within Deck |
| |
| |
| |
| |
| AWP Office/Storage- BLDG NO: 0629 |
| Occupancy: Office/ Storage |
| Constructed: 1995 |
| Construction: Wood Frame, Shingle Roof, Man Door |
| Square Footage: 160 |
| Stories: 1 |
| Life Expectancy: 5 Years |
| |
| |
| |
| |
| AWP Office/Storage- BLDG NO: 0630 |
| Occupancy: Office/ Storage |
| Constructed: 1995 |
| Construction: Wood Frame with Shingle Roof, Man Door |
| Square Footage: 160 |
| Stories: 1 |
| Life Expectancy: 5 Years |
| |
| |
| |
| |
| AWP Wax Station- BLDG NO: 0632 |
| Occupancy: Storage |
| Constructed: 1995 |
| Construction: Wood Frame, Metal Roof, 3 Sides |
| Square Footage: 290 |
| Stories: 1 |
| Life Expectancy: |
| |
| |
| |
| |
| AWP Wax Shed- BLDG NO: 0633 |
| Occupancy: Storage |
| Constructed: 1995 |
| Construction: Wood Frame, Metal Roof, 3 Sides |
| Square Footage: 72 |
| Stories: 1 |
| Life Expectancy: |
| |
| |
| |
| |
| AWP Washdown -BLDG NO: 0602 |
| Occupancy: Shop |
| Constructed: 1995 |
| Construction: Metal Frame, Metal Roof, 4 Metal Sides with (3) Roll Up Doors, 1 Man Door |
| Square Footage: 1,770 |
| Stories: 1 |
| Life Expectancy: |
| |
| |
| |
| |
| AWP Electric Building- BLDG No: 0612 |
| Occupancy: Electrical Controls |
| Constructed: 2006 |
| Construction: Metal Frame, Metal Roof, 4 Metal Sides with Man Door |
| Square Footage: 320 |
| Stories: 1 |
| Life Expectancy: |
| |
| |
| |
| AWP Lumber Storage-BLDG No. 0703 |
| Occupancy: Storage |
| Constructed: 1995 |
| Construction: Metal Frame, Metal Roof, 4 Metal Sides, (2) Open Sections for Lumber Movement |
| Square Footage: 13,365 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| AWP Lumber Storage-BLDG No. 0704 |
| Occupancy: Storage |
| Constructed: 1999-2006 |
| Construction: Metal Frame, Metal Roof, 4 Metal Sides, (3) Open Sections for Lumber Movement |
| Square Footage: 39,909 |
| Stories: 1 |
| Life Expectancy: 25 Years |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| Rolling Stock |
| TX-330M Taylor Forklift, (sn: SGE-36545);8' x8" Forks; 6,409 Hours |
| TE-250-M Taylor Forklift (sn: S-H5-23881) Remanufactured by Taylor; 8'x8" Forks, 33,582 Hours |
| Caterpillar 262C Sid Steer Loader (sn: CAT0262CPMST05012) Quick Couple, Bucket, 29,426 Hours |
| Caterpillar 320D FM Loader Model 2012 (sn: CAT0320DCGK00304) 20,435 Hours |
| Taylor TE250M Forklift (sn: S-H5-23883) 8'x8" Forks, Side Shift, Load Leveling, 20,514 Hours |
| Rotobec Grapple 5052 RT402 (sn: 109204-1-1) |
| Volvo L120H Wheel Loader (sn: VCEL120HJF0014410) Optic Shift, Not Quick Couple, Log Clamp, 14,394 Hours |
| Volvo L120H Wheel Loader (sn: VCEL120HA0S632035) Optic Shift, Not Quick Couple, Log Clamp, 15,418 Hours |
| Taylor X300S Forklift (sn: 41985) Lease, 8'x8" Forks, Self Position, Load Level |
| 2015 Bobcat E35 Excavator (sn: AR1K2175) |
| Caterpillar 262D3 Skid Steer Loader (sn: CAT0320DCGK00304) Lumber Forks, 3479 Hours |
| Caterpillar V90E Forklift, 9,000 lb. capacity, (sn: 37W20061) |
| (3) Fork Extenders |
| Cat 950G Loader, 25,000 lb., (CAT095CGA2JS01500), Bucket/Grapple 8', 18,094 Hours |
| Taylor TE250M Forklift (sn: 23882) 8'x8" Forks, Load Leveler, Side Shift, 8494 Hours (rolled over) |
| Taylor TE250M Forklift (sn: S-H5-23884) 8'x8" Forks, Load Leveler, 8493 Hours (rolled over) |
| Taylor TE300M Forklift (sn: S-H6-18126), 8'x6" Forks, Load Leveler, 2751 Hours (rolled over) |
| Taylor TE300L (sn: S-H7-17594), 30,000 lb. capacity, 43,248 hours (rolled over) |
| Bobcat S15 (Does Not Run) |
| Genie Boom (sn: 45-228230), 4 Wheel Drive Personal Expanda Boom |
| Prentice Knuckle 410D Track, Model D410D (sn: 410P51718), Unknown Hours |
