COMPLETE OPERATION LOCATED IN ALTO, TX TO INCLUDE 17 ACRES AND THE FOLLOWING EQUIPMENT INVENTORY.
Cut Up Line |
20' 25 stand deck with 78 chain gear reduction drive |
8' Rollcase with (4) 6 x 24 rolls gravity rollcase |
Baker 12" Wide 2 head resaw with 2 - 30 HP motors with hydraulic drive |
8' 48" x 4" gravity rollcase, 4 rolls |
Newman KM-16 5 saw individual motors with 30" waste belt under and 12" material conveyor behind |
Baker 12" x 22" transfer belt, gear reduction drive |
Baker 5 head resaw, 6" belt, (5) 20 HP motors |
Hydraulic drive for belt & rollers, model BBR-0'C, S/N 18-4569 |
6' x 90" x 22" belt, gear reduction drive |
Morgan 2 head resaw with feeder S/N 080797 |
Baker 4 section rotating stacking, 5' x 8' |
4 x 4 stacking racks |
40' x 12" return belt conveyor, Hytrol drive |
17' x 22" clean belt waste conveyor, gear reduction drive |
2024 Skid steer trash hopper 1.75 cyl. |
95 Baker BBR single head resaw with 12" wide return belt |
Buss 30" x 5" single surface top |
Koger 32" blower with 7.5 motor. Not installed. |
1st Sawmill |
20' x 15' wide 3 strand deck, H78 chain, 6" loader arms, gear reduction drive |
Baker BBS S/N 02-282 band sawmill with hyd. supply, 35' bed |
20' x 5' wide outfeed deck with roller chain, gear reduction drive |
20' 6" wide deck H78 chain with gear reduction drive |
Morgan portable Scragg with electric motor |
Manual chop saw with (2) 10" gravity rollers, 5 HP motor, 46" x 14" waste conveyor |
2nd Sawmill |
60' waste conveyor, 10' loader belt chain + drive |
20' Spragger |
7.5 tank mount compressor |
3' x 7' skid steer bucket |
18' x 7' skid steer bucket |
Wood Mizer portable with trailer lights, twin blade edger with CAT direct power unit, 196 hrs |
12' x 7' wide 3 strand deck, 2" chain, 4" loader arms, hyd. drive |
Baker BBS-O S/N 05-403 band sawmill, 32' capacity |
Chop saw (3), 10' gravity rollcases |
Scragg mill |
30' Helle 45 ton 1" wide, 30' long log deck, hyd. |
Helle End Dogging Scragg, 56" saws, (2) 3 saws, Edgers, cab, controls, outfeed belt, hyd. pack, motor control |
24' 4 strand landing deck, 130' roof top chain |
4 head trimmer with built-in waste conveyor |
15' x 16" waste conveyor |
25' x 18" transfer belt |
20' x 22" transfer belt with feeder on end |
Baker 4 head 6" wide resaw with hyd. supply |
10' x 22" gravity roll case |
12' x 8 1/2" transfer belt drive |
12' x 30" incline belt drive |
Baker 4 side lumber stacker unit |
80' scragg container |
40' x 6" waste belt conveyor |
35' x 20" slab waste conveyor |
20' vibrating conveyor, 5 HP drive |
Precision 48" chipper, HFTD, 125 HP motor |
30' 110 chain conveyor |
LS 4080 LP knife grinder |
2016 Sawmill hyd. S/N 201639, 817B chipper, with Kohler engine |
25' portable waste conveyor, gas engine |
Rolling Stock |
Case 721F S/N NBF222147 wheel loader, JRB quick coupler, approx. 7500 hrs, A/C, cab, bucket, interior radio & horn, battery dead |
|
|
Cat 262D3 wheel skid steer, ZB200259 |
Cat 272D3 wheel skid steer, HX201092 |
Cat 938M wheel loader, R5K02162, 406 hrs |
Cat D7G dozer, 32A01005 |
Clark propane lift, 5000 lb lift, CQ230L-0163-9841 C N F |
Timber Jack 190 knuckle boom |
Timber Cannon 22648XL man lift |
